Do-it-yourself Spray in Bed Liner/Undercoating Kits for
your Truck, Offroad Vehicle, Classic Car or Hotrod.
Al's Liner kits allows
individuals to get the results of a high dollar liner application from a
franchise authorized installer, right at home.
Al's Urethane/Acrylic Coating System, is designed
to be the markets first and only professional grade urethane coating for
Do-it-Yourselfers. Whether it be for Bed Lining, Undercoating, Interior Coating
or just general applications around your shop and home, it serves up some
serious protection no matter where or why you use it.
Our Liner was developed from one of the
leading Industrial Protective Coatings and Truck Bed Lining systems. Our
system is not a thin, reduced/watered down coating, this is why it must be
applied with our special supplied spray gun.
Unlike many roll on coatings or undercoats
this liner provides the ability to apply it as thick or as thin as you like with
a variety of textures and in the color of your choice.
This high build and long lasting protective
coating Liner provides individuals the opportunity to apply a heavy duty
flexible acrylic/polyurethane professional looking protective coating. It can be
used as a tuff yet flexible under coating to stop stone damage under fenders and
floors etc on your restoration or hotrod. It can be painted over or tinted and
match an endless array of textures and colors
The
liner has unique
ability to protect your pride and joy not only from everyday wear and tear, but it
also gives you protection from the sun and rain. Our liner is 100% UV resistant.
Your beautiful finish will not fade, no matter what color you spray.
\
Before and After - 61' 13 Foot Boston Whaler Boat
coated with Al's Liner
Al's kit allows individuals to get the results of a high dollar
liner application from a franchise authorized installer, right at home.
Spray in any color.
Achieve a wide variety of textures.
Sprays in 4 easy steps.
You don't need a spray booth and minimal personal
protection required*.
One Gallon of Liner is enough to cover roughly 45
SqFt at 40 mils (approx 1mm), or 22sq ft at 1/16" (approx 2mm) thick.
All this
protection for $208.00 $164.99 with FREE SHIPPING*
for a One
Gallon
Kit which includes a Spray Gun!
Use Coupon Code "Als" at Check
Out to receive Free Shipping
All kits include a Primer with Spray Applicator, Liner
Components, Spray Gun, Mixer
and Instruction sheet.
Standard Colors
Black
Tan Grey
Bed Liner Kit- Black
$208.00
On Sale $164.99
WithFree Shipping!
ALK-B
Bed Liner Kit-
Tan
$208.00
On Sale $164.99
WithFree Shipping!
ALK-T
Bed Liner Kit-
Grey
$208.00
On Sale $164.99
WithFree Shipping!
ALK-G
For extra
Liner Component purchase by the
gallon below.
All Extra Gallons include Primer with Spray Applicator, Liner
Components, Mixer
and Instruction sheet.
Price per Extra Gallon $109.00 with FREE SHIPPING*!
Use Coupon Code "Als"
at Check Out to receive Free Shipping
Extra Bed Liner Black - (1 Gallon) $139.00
$109.00
On Sale WithFree Shipping!
ALG-B
Extra Bed Liner - Tan (1 Gallon) $139.00
$109.00
On Sale WithFree Shipping!
ALG-T
Extra Bed Liner - Grey (1 Gallon) $139.00
$109.00
On Sale WithFree Shipping!
ALG-G
Custom
Colors
For custom colors
you can add standard paint tints or dyes available from any automotive paint supplier/auto
parts store. For each gallon of liner you will require
8oz of color Tint/dye, for some colors like yellow you will require up to 16oz
of Tint/dye.
Green Purple
Blue Red
Maroon Yellow Brown
NEW AL's Liner
Products!!
Use Coupon Code
"Als" at Check Out to receive Free Shipping
Al's Liner Air Texture Guns are great for spraying on
Al's Liner DIY Truck Bed Liner Kits. However, this gun is also great for
spraying many materials. This is an all purpose air texture gun that can
bed used to spray on acoustics, ceiling textures, drywall mud, interior
and exterior finishes and much more.
Al's Liner Air Texture Guns are the preferred choice to spray Al's Liner
DIY Truck Bed Liner Kits and when spraying HNR. Due to its special 5-point
spray texture nozzle, this gun gives AL's Liner Truck Bed Liner Kits a
great texture. With a simple air regulator, you can adjust the air
pressure and achieve various textures. This gun also has an adjustable
trigger pull mechanism that allows you to adjust how much trigger you can
pull. It is easy to clean and disassemble.
Specs
5-Point Texture Nozzle
3 Different Texture Orifices
Adjustable Trigger
Comfort Grip Handle
1.25 Gallon Hopper
Al’s Liner Brush/Roller Kit
AL-RK
$18.75 $14.99
Free Shipping when purchased with Al's Liner
Al’s Liner is now offering a brush/roller kit for Al’s
Liner. This will offer your customers the ability to apply their Al’s Liner
without having to spray it. The kit includes one three inch brush, two four
inch rollers and arm and one paint tray. With the shed resistant woven
rollers, you can apply up to a 15mil or 1/64th of inch coating in one pass,
however two coats are recommended. Great for tight area application,
interior sound deadening application and even for truck beds. Provides a
standard orange peel texture commonly seen in roll on bed liners, can also
be used with Al’s Rubber Crumb.
1-3"
Brush
2-4" Shed Resistant Roller Pads and Application Arm
1 Paint Tray
Apply at any thickness, just requires multiple coats.
NYLON 4" CUP BRUSH
Our
nylon filament cup brush is made of a special nylon filaments impregnated
with silicon carbide. This nylon brush lasts up to six times longer than
conventional wire brushes. Nylon filament cup brush uses include frame and
body cleaning, polishing, deburring, scrubbing and brightening, surface
refinishing and decorative finishing. Safe for use on metal, wood, aluminum,
and plastic surfaces. An excellent prep tool for you Al’s DIY Bed Liner.
Al's Liner 4" Nylon Cup Brush AL-CB4
$23.00 $18.36
Free Shipping when purchased with Al's Liner
4" Diameter Cup Brush
Standard 5/8 Auger
Max 6500 RPM
Non-Sparking
Will not load or clog while in use.
NYLON 6" CUP BRUSH
Our
nylon filament cup brush is made of a special nylon filaments impregnated
with silicon carbide. This nylon brush lasts up to six times longer than
conventional wire brushes. Nylon filament cup brush uses include frame and
body cleaning, polishing, deburring, scrubbing and brightening, surface
refinishing and decorative finishing. Safe for use on metal, wood, aluminum,
and plastic surfaces. An excellent prep tool for you Al’s DIY Bed Liner.
Al's Liner 6" Nylon Cup Brush AL-CB6
$32.00 $25.40
Free Shipping when purchased with Al's Liner
6" Diameter Cup Brush
Standard 5/8 Auger
Max 6500 RPM
Non-Sparking
Will not load or clog while in use.
Al's Liner Rubber Crumb Additive
$16.80 $12.00 Free Shipping when purchased with Al's
Liner
AL-RCA
Al’s Liner is now offering a rubber crumb additive for
our bed liner kits. Great for non-skid coatings such as, decks, walk ways,
boat decks or any area that you want an aggressive texture but still remain
user friendly. The rubber crumb retains a good working surface, it is not
hard on the knees or bare skin like a quartz or sand mix is but still
provides a great non skid surface. Sold in quart sizes to provide a 50%
rubber load mix per gallon, this is the recom-mended amount to provide an
aggressive texture and still allow easy flow and spray pattern through the
Al’s Liner Spray gun.
Please Note: 1 quart or rubber crumb
additive per gallon will give you a very aggressive texture,
for less texture use less crumb. It is also wise to mix up Al's liner in
smaller batches when using it with the crumb.
Al's Liner Vinyl Flattener Additive
$32.90$23.65 Free Shipping when purchased with Al's
Liner
AL-VFA
Al’s Liner is now offering a vinyl flattener additive for our bed liner
kits. The flattener allows the applicator to achieve Semi Gloss and Matte
finishes. Basically a half of a quart to one gallon of Al’s will give them a
semi flat finish and the full quart of flattener to a gallon will give them
a flat or matte finish. Originally developed for the military for there anti
reflective finishes, the flattener has been used with our material for over
a decade and has many applications
.
Use Coupon Code "Als" at Check Out to
receive Free Shipping
Al’s HNR (Heat & Noise Reducer)
AL-HNR
$69.45 per gallon
Al's HNR is an inexpensive way to drastically
reduce heat and noise transfer. Our special blend of ceramic microspheres
creates a coating that will withstand incredible amounts of heat and also
provide some noise reduction. Light weight and easily top coated, HNR makes
an excellent base coat for Al’s Liner on interior automotive applications.
Easy to apply and environmentally safe,
Easily
finished and top coated.
Use Al's Liner Gun to Spray HNR.
Great for Hot Rodders
Up to 500 degrees Fahrenheit
Excellent base coat for Al’s Liner, perfect for hot rods and jeep tubs
Our
nylon filament cup brush is made of a special nylon filaments impregnated
with silicon carbide. This nylon brush lasts up to six times longer than
conventional wire brushes. Nylon filament cup brush uses include frame and
body cleaning, polishing, deburring, scrubbing and brightening, surface
refinishing and decorative finishing. Safe for use on metal, wood, aluminum,
and plastic surfaces. An excellent prep tool for you Al’s DIY Bed Liner.
